How To Get Ready For The Pinewood Derby: Rules, Timeline, And Inspection Checklist

Getting ready for the Pinewood Derby comes down to five steps:
1. Get your pack’s rules.
2. Build the car from the official kit with an adult.
3. Check its size and weight against your pack’s limits.
4. Pass inspection.
5. Talk about good sportsmanship before race day.
There are no national Pinewood Derby rules, so your pack’s rules always come first. Many packs start from the guidelines that come with the official kit: a car no longer than 7 inches, no wider than 2-3/4 inches, and no heavier than 5 ounces.
Below you’ll find the common rules, a simple timeline for families and packs, an inspection checklist you can use at home, and race-day tips to help the whole day run smoothly.
What Are The Pinewood Derby Rules?
According to Scout Life, Scouting America’s magazine, there are no national Pinewood Derby rules. Each pack sets its own. If your district or council holds a derby and your pack sends its winners, those cars will need to follow the district or council rules too.
Most packs base their rules on the guidelines that come with the official kit. These are the typical rules:
- Length: no more than 7 inches
- Width: no more than 2-3/4 inches
- Weight: no more than 5 ounces
- Parts: the body, wheels, and axles come from the kit
- No extras: no wheel bearings, washers, bushings, or springs
- Lubricant: dry lubricant only, such as powdered graphite; no oil
- Gravity only: the car must be free-wheeling, with no starting devices
- Nothing loose: no loose materials of any kind in or on the car
Paint, decals, and added weights are usually fine as long as the finished car stays within the size and weight limits. Always check your own pack’s rules before you cut the block.
Questions To Ask Your Pack Before You Build
Pack rules often answer a few extra questions. If yours don’t, ask your Cubmaster or derby chair before build day:
- Does the car have to be built this season, or can Scouts reuse an old car?
- Is there a height limit?
- Do all four wheels have to touch the track?
- Can the wheels or axles be sanded, shaped, or polished?
- Which lubricants are allowed?
- When and where is check-in and inspection?
How The Pinewood Derby Connects To The Race Time Adventure
Every Cub Scout rank has a Race Time elective adventure, and the Pinewood Derby is one of the two races it’s built around (the other is the Raingutter Regatta). Because Race Time is an elective, finishing it can count as one of the two electives your Scout needs for rank.
The requirements change a little by rank, but they follow the same pattern. For Wolf, Scouts build a car or boat with an adult, learn the rules of the race, find ways to make their vehicle faster, talk with their den about good sportsmanship, and take part in the race. Lions and Tigers assemble and decorate their car with their adult partner.
One important safety note for Lions: Scouting America’s Race Time Lion page says Lions may not use hand tools. Lions can sand and paint their cars, while adults do the cutting and assembling.
You can see every requirement for your Scout’s rank here:
- Race Time Lion
- Race Time Tiger
- Race Time Wolf
- Race Time Bear
- Race Time Webelos
- Race Time Arrow of Light
A Simple Pinewood Derby Timeline
Every pack picks its own race date, so count backward from yours. Here’s an easy plan for families and leaders.
Six Or More Weeks Before Race Day
- Pack: Share the race date, the rules, and the check-in time. Hand out kits and set a build day for families who need tools or help.
- Families: Read the rules together and sketch a few car designs on paper.
Four To Five Weeks Before
- Dens: Work on the Race Time adventure, like learning the rules and talking about how to make a car faster.
- Families: Trace the design onto the block and have an adult cut the basic shape.
Two To Three Weeks Before
- Sand, paint, and let the car dry completely.
- Add weights a little at a time, keeping them securely attached.
- Pack: Line up volunteers for check-in, inspection, the track, and the snack table.
The Week Of The Race
- Put on the wheels and axles, then add lubricant if your pack allows it.
- Weigh and measure the car at home using the checklist below.
- Talk with your Scout about good sportsmanship: cheering for others, being a good winner, and being a good sport if their car doesn’t place.
Pinewood Derby Inspection Checklist
Run through this at home a few days before the race, using your pack’s numbers if they’re different from the typical ones below.
- ☐ The car is no longer than 7 inches.
- ☐ The car is no wider than 2-3/4 inches.
- ☐ The car weighs 5 ounces or less, with paint and decorations on.
- ☐ The wheels and axles are the ones allowed by your pack.
- ☐ There are no bearings, washers, bushings, or springs.
- ☐ Only dry lubricant was used, if any.
- ☐ Weights and decorations are firmly attached, with nothing loose.
- ☐ The car rolls freely and has no starting device.
- ☐ The paint is completely dry.
- ☐ Your Scout’s name is on the bottom of the car.
If a car doesn’t pass at check-in, don’t panic. Under the guidelines in the kit, the owner is told why and gets time during the weigh-in period to fix it. A small bag with spare weights, tape, and a little sandpaper can save the day, as long as your pack allows changes at check-in.
Pinewood Derby Kits And Supplies
A few simple supplies can make the build a lot easier, from the official kit to the weights and graphite that help a car meet the typical 5-ounce limit. Your pack’s rules always come first, so check them before you buy any upgrades, especially a pre-cut body or anything that changes the wheels or axles.
- Boy Scouts of America Official Pinewood Derby Car Kit. This is the official kit most packs start with: a pine block, official wheels, and lead-free nail-type axles, so every Scout is building with the same parts.
- Boy Scouts of America Pinewood Derby car (Precut Sports Car). If your pack allows a pre-cut official body, this sports car is already shaped and sanded, which is a big help for families who don’t have a saw.
- Tungsten Incremental Cylinder Weights 3 oz. Tungsten is denser than lead, so you can add weight in a smaller space and sneak up on the 5-ounce limit a little at a time.
- Pine Car Derby Speed Accessories, Wheel Turning Mandrel. This simple mandrel and sandpaper let you smooth the official wheels so they roll more evenly, without swapping them for a different set.
- Maximum Velocity! Premium Graphite | Pinewood Car Wheel & Axle Lubricant. Most packs allow dry lubricant only, and this fine graphite comes in a pointed bottle that makes it easy to get into the wheels and axles.
- Clear Plastic Display Case for 1:24 Scale Cars, A clear case with room for a 7-inch car keeps the wheels and axles from getting bumped on the way to the track, and your child will feel so proud putting his car on display after the race.
Race Day Tips For Leaders And Families
- Arrive early. Check-in and inspection take longer than you think.
- Carry the car in a box. A small box with a soft cloth keeps wheels and axles from getting bumped.
- Hands off after inspection. Many packs ask families not to touch cars once they pass, and the kit guidelines say approved cars aren’t reinspected unless they’re damaged.
- Celebrate every car. Awards for design, color, or creativity give every Scout something to cheer about.
- Plan for the wait. Races take a while, and younger Scouts and siblings get restless between heats.
Keeping Scouts And Siblings Busy Between Heats
A simple activity table near the track is one of the best things a pack can add to race day. Kids and their siblings have somewhere to go between heats, and parents can actually watch the race.

- Secret codes: Our Top Secret Code Activity Bundle is a great addition to a waiting table. Kids learn to solve codes and write their own, and answer sheets are included.
- Coloring: Our Scout Law coloring page is a calm, quiet option for younger Scouts and siblings.
- Icebreakers: Games from 8 Creative Icebreaker Games for Kids help visiting friends and new families feel welcome.
- Movement breaks: If you have a hallway or open corner, pick one game from 15 Team Building Activities & Games.
Frequently Asked Questions
How Heavy Can A Pinewood Derby Car Be?
For most derbies, the finished car can weigh no more than 5 ounces. Your pack’s rules decide the final limit, so check before adding weights.
Can We Use Different Wheels Or Axles?
Usually not. Scout Shop says most derbies require the wheels, axles, and block from the official kit, so every Scout starts with the same materials. Some packs allow official replacement wheels and axles, so check your rules.
Who Should Build The Car?
The Scout builds it with an adult. Older Scouts can do more of the work with supervision. Lions sand and paint while adults cut and assemble. The goal is for your Scout to feel proud of a car they helped make.
Does The Pinewood Derby Count Toward Rank?
It can. Racing in a Pinewood Derby is one requirement of the Race Time elective. Once your Scout finishes every Race Time requirement for their rank, it can count as one of their two electives.
Have fun with it! Check your pack’s rules, build together, run through the checklist, and set up a waiting table with our secret code pages and Scout Law coloring page. Race day will feel a lot calmer for everyone.
